102032 Star Brite Surface Sanitizer

Registered for use in hospitals, medical laboratories, rehabilitation facilities, diagnostic centers, clinics, first responder facilities and equipment, veterinary hospitals, medical equipment, pharmaceutical facilities and laboratories.
Performacide ® uses a pre-measured pouch that when immersed in the corresponding amount of water creates a 100 ppm chlorine dioxide solution.
Allow the pouch 60 minute to reach full activation and the 100 ppm ClO2 solution lasts 15 day when stored in an oxidation-proof, dark closed or sealed container in a cool dark location.
Using EPA label directions, PERFORMACIDE ® can be diluted to 20 ppm for use as a sanitizer on non-food contact surfaces and 5 ppm for use as a sanitizer on food contact surfaces.
For disinfecting, wet the area to be treated with a mop, sponge or pressurized tank sprayer and allow to air dry.
This product can be applied to walls, floors, furniture, stainless steel, glass, vinyl or other hard non-porous surfaces.
For sanitizing hard non-porous, food contact surfaces dilute to 5 ppm and allow 5 minute of exposure time.
For sanitizing hard non-porous, non-food contact surfaces dilute solution to 20 ppm and allow 5 minute of exposure time.
Please see inner label instructions for dilution tables and ratios.
To test activated solutions after storage or dilution use chlorine dioxide test strips for concentrations with a range of 0 ppm up to 500 ppm.

• Disinfectant For Hard Non-Porous Surfaces
• Active Ingredient Sodium Chloride
• 32 Ounce Kit With Spray Bottle And 1.5 Gram Concentrate Pouch
• With US Label

• Registered for use in hospitals, medical laboratories, rehabilitation facilities, diagnostic centers, clinics, first responder facilities and equipment, veterinary hospitals, medical equipment, pharmaceutical facilities and laboratories.
  Performaci