89496 3M Sanding Disc

Scotch-Briteâ„¢ Rolocâ„¢ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web.
It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material.
The high-strength fibers are highly conformable, resist chunking and loading, and perform well on the edges of a workpiece.
With its reengineered fiber web, the Scotch-Briteâ„¢ Rolocâ„¢ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength.
With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates.
It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.
In addition to its high conformability, the Scotch-Briteâ„¢ Rolocâ„¢ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life.
That all adds up to a disc you can spin onto your disc sander or die grinder with confidence.
To engineer our Scotch-Briteâ„¢ Rolocâ„¢ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin.
Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep.
The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral delivering a consistent cut over the life of the abrasive.

• Extra Coarse Grade
• 3 Inch Diameter
• TR Attachment
• Single
• Purple
• Silicon Carbide
• Machine Use
• Used For Rust Removal/ Paint Removal/ Mill Scale Removal/ Coating Removal/ Adhesive Removal/ Surface Preparation

• Scotch-Briteâ„¢ Rolocâ„¢ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web.
  It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the